Parts & Accessories

Replacement 2Density insoles Fits all Giant & Liv non-MES road and mountain shoes - Giant Phase - Liv Mova - Giant Transmit - Giant Phase 2 - Liv Regalo - Giant Flux - Liv Fera

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

- Replacement ratchet tongue for selected styles of shoes - 2 pieces - 93mm

- Allows installation of 2-bolt SPD-style cleats on select Bontrager Road shoes - Compatible with Bontrager road shoes with nylon sole - Adapter plate replaces rubber plug in sole of shoes - Packaged as pairs

- Heel Stud Replacement for Giant Road Shoes 2021+ - Shoe Sizes: 45-48

Composite wear plate protects cleat mounting area on Drako Carbon SRS soles.

IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement

L6 Boa assembly for all Specialized L6-equipped shoes.

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.

Shot 2 Anti Slip Heel Insert. Sold in pairs.

C-Boost SRS Toe Insert from Sidi.

Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.

Fits all SIDIs with ratchet buckles. Retro fitting on older SIDIs also requires replacing the Caliper Strap.

Caliper Buckle Strap from Sidi.

- Three EVA interchangeable levels of support for arch and metatarsal offer complete customization - EVA base material with TPU vibration dampening material in the forefoot area for proper support and cushioning - Co-molded heel support zone is optimized to help stabilize the foot during pedaling - Articulating arch support area is designed for compatibility with ExoWrap technology - TransTextura Plus layer transfers moisture and helps fight bacteria and odors

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws

- Made from wind and waterproof latex to keep your feet warm and dry - Lightweight and flexible no need for zippers or Velcro that cause leakage - Smooth form fitting design aids in aerodynamic efficiency - Easily fits into jersey pocket or saddle bag

- Made from wind and waterproof latex to keep your feet warm and dry - Lightweight and flexible no need for zippers or Velcro that cause leakage - Smooth form fitting design aids in aerodynamic efficiency - Easily fits into jersey pocket or saddle bag

- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Neoprene Toe Covers, history is doomed to repeat itself this winter. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene

Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long-lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.

- Protect your mountain bike shoes from rain and mud while keeping your feet warm and dry - Designed to accommodate bulkier mountain bike shoes. Cleat holes are cut specifically for mountain bike cleats - Lightweight and flexible. No need for zippers

- Reinforced bottom and toe area for extra durability - Made from wind and waterproof latex to keep your feet warm and dry - Lightweight and flexible. No need for zippers or Velcro that cause leakage

96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening.

96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening. Features a reflective strip on cuff for additional visibility.

Soft Instep Closure 2 - Kaos - Genius - Cape - Dominator

Tecno 4 Soft Instep Closure - Wire 2 - Ergo 5 - Genius 10 - Drako 2 - Dragon 5 - Dominator 10

Soft Instep Closure Systems for Tecno 3 models. - Wire - Ergo 4 - Alba/Alba 2 - Drako - Dragon 4 - Trace/Trace 2

- Wind-resistant fabric - Microfleece lining - Reflective logo

Black, Sixty Tecno 4 Plate from Sidi.

- Windproof and waterproof materials keep your feet warm on cool morning or winter rides - Designed for temperatures down to 20 degrees in dry weather and 60 degrees in wet weather - Fastens easily with a snap under your shoe

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.

Comfort Padded Insoles are the standard replacements for Genius 6.6, Wire, Drake, Ergo and Dragon.

London Insulated Insoles from Sidi.

Comfortable elasticized shoe cover with rear zipper. - Made of elasticized Elastane for great comfort. Elastic band on the top opening and rear zipper - Reflective tape on the rear part, lateral S-logo print. - European sizes S (35-37) M(38-40) L(41-43) XL (44-46)

Planet Bike's Comet Shoe Covers are made of neoprene for excellent water and wind resistance and warmth. Plus they have Velcro closures for easy on/off and reflective accents for safety.

There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

- Wind-resistant fabric - Microfleece lining - Water-resistant - Reflective logo

For some serious protection in the cold and wet for your toes, slip on a pair of the Neoprene Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Rear opening with zippers securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion resistant toe and heel sole utilizes universal welted velcro closure, so these covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene

For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.

Adjustable Heel Retention System from Sidi.

A little cold or windy weather in the forecast? No problem. When full shoe covers are overkill, pull on our Neoprene Toe Covers for just the right amount of warmth and protection. Perfect for short winter rides or longer shoulder season excursions, the stretchy, weather-resistant design is compatible with all cleat types. Abrasion-resistant panels add durability, so feet stay comfortable ride after ride. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo

Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance

Reflective Adjustable Retention System from Sidi.

- More performance - Less discomfort - Better power transmission Full speed ahead – optimize your performance to the pedals! The IP Pro Solestar ergonomically stabilizes your foot on road and mountain bikes, supports efficient and comfortable movement, maximizes leg power and reduces discomfort. The IP Pro Solestar was developed with internationally renowned insole specialist Solestar.

- More performance - More comfort - Also suitable for walking Misalignment of the feet can significantly limit the enjoyment of cycling. With the IP Touring Solestar, Ergon offers all touring riders a significant gain in comfort, especially when covering longer distances. The patented stabilization delta keeps the foot in an ergonomic position, prevents discomfort and optimally transfers leg power to the pedal. Efficiency is maximized with a grippy surface made of nylon fabric. Finely ground walnut shells in the 3D foam padding aid in a keeping the feet cool. The insole shell, made of fiberglass composite, enhances pedaling efficiency. The IP Touring Solestar was developed with the internationally renowned insole specialist Solestar.

Neoshell Rain Shoe Cover from Specialized.

Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding

Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes! - Suitable for MTB cleats only

- Windproof and water-repellent ProTextura 4-way stretch fabric for maximum protection and breathability - Zipper closure for easy on and off - Anti-abrasion sole cover - 3D ergonomic fit - 3M Scotchlite reflective details for enhanced visibility in low light

Shot 2/Tiger 2 Double Tecno 3 Push System Half Pair from Sidi.

Sidi Memory Insoles.

Tecno 3 Push Tensioner Original part replacement tensioner for Genius 10, Alba 2, Alba, Dominator 10, Trace 2, Trace.

Tecno 3 Flex System Tensioner 255 Maxi from Sidi. Original part replacement tensioner for Turbo

Key Benefits: - Tough nylon faced neoprene upper - Offset rear zip with snap down puller and zip guard - Moulded rubber toe cap with treaded underside to help climb steep, muddy slopes - Asymmetric front seam for improved fit - Hard wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank rub protection - Reflective detailing - Suitable for MTB cleats only - 90 day Satisfaction Guarantee Design Philosophy Endura were among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. Improved Durability The stand out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulate layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. 90 Day Satisfaction Guarantee So confident are we in this product that, if you are not entirely satisfied with it then we offer a no-quibble refund or replacement policy within 90 days of purchase.