Safety

Universal mounting system to fit on handlebar, bar ends, frame or fork. - Shock resistant - Mirror angle fully adjustable - Easy installation no tools needed - Comes with bracket to fit 22 to 60 mm (7/8" to 2 1/3")

Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.

The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.

• Double-sided, high-visibility material • Safety orange triangle flag • Axle mount design

- Eady to install - Spoke mounted - 2 per set

Let everyone know your coming with Sunlite's Windmill Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed. And perhaps best of all, for added flair the windmill spins as you ride through the wind!

Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!

Ring-a-ding-a-ding! Get noticed and keep slowpokes out of your way with Serfas' line of minimalist style, simple-to-use handlebar mounted bicycle bells. The perfect socially acceptable alternative to shouting crowd favorites such as "watch out!" and "move it or lose it!" - Aluminum Construction - Multi-Strike Mechanism - Secure Screw Type Bracket w/ Rubber Insert - Anodized Silver Finish - Fits 19 - 22.2mm Diameter Handlebar

Increase awareness and visibility of your surroundings as you ride. Features: - Blast-Resistant Glass Reflective Lens - 360 Degree Adjustable Viewing Angle - Mounts 21-26mm Diameter Bars (5mm Hex Wrench Required For Install) - Eco-Friendly High Impact Nylon Fiber Body Specs: - Mounts 21mm-26mm Diameter Handlebars - Lens: Blast-Resistant Glass - Color: Black - Weight: 119 Grams (Per Side) / 238 Grams (Combined Left and Right) - Quantity: 1 (Left/Right Sides Sold Individually) - Installation Notes: 5mm Hex Wrench Required

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - ?Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Mirrycle's Incredibell Brass Duet Colors makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Its compact size lets you mount it just about anywhere on your handlebars. And, the bell's vibrant colors add a splash of personality to any bike. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

Mounts on handlebars higher than standard bells. Sits close to your fingers and doesn't interfere with other handlebar-mounted devices. - Dome Diameter: 40mm (1.57") - Fits handlebars with 22.2mm (.87-inch) outside diameters

The wheels on your bike spin, so why not your bell. Vintage-style spinner bell produces a great ring as it twirls around. • Top your bell with a cap from your favorite beverage. The Bottlecap Bell has a top that is shaped like a bottle so you can put your favorite cap on the top • Bottlecaps can easily be replaced when it is time for a new one • Fits standard bicycle handlebar • Includes attachment hardware

Honka honka. How you say 'hello' in Electra Also translates to 'hey there,' 'coming through,' and 'sup.' Electra bugle horns are arguably the best way to let others know you're around. Product details - Arguably the most fun way to alert other riders or pedestrians of your presence - Classic bugle-style horn has a deep tone - Easily mounts to bicycle handlebars without tools - Classic steel horn with a large rubber bulb and a gloss painted surface - Plastic bracket with silicone strap fits a wide variety of handlebars

The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Cheerful 'ding-dong' doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: 22.2mm - Material: Steel - Weight: 130g

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

Let people know you're coming through. And do it in style. The perfect way to say 'Hello.' Or 'hey there,' 'coming through,' and 'sup. We've made ringing an art form, choose from our unique graphics and bold colors. Product details - Easy-to-push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware