Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

Wolf Tooth Components 104 BCD Chainrings
$59.95 - $64.99
The 104 BCD chainring was Wolf Tooth’s first product ever and it is the most common bolt pattern on double and triple cranksets. Wolf Tooth’s patented Drop-Stop tooth design is the best available anywhere. Compatibility: - These rings fit any 104 BCD crankset - 30 tooth rings require chainring bolts that are 7-10mm long. All other sizes require single ring specific bolts that are ~6mm long. - 30t x 104BCD ring is the only QUARQ power meter compatible 30t ring available! - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$69.95 - $79.95
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components 64/104 Chainring
$63.95 - $69.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Direct Mount Boost Chainrings for SRAM
$69.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$69.95 - $79.95
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
TruVativ Trushift Steel Chainring
$21.99 - $25.17
- Trushift chainrings feature shift ramps and pins - Drivetrain compatibility: 8, 9, 10, 11 - 104mm BCD
Specialized P.Series Sprocket
$40.00
Add some style to your park bike with Specialize's P.Series Sprocket. CNC'd from light and strong 6061 aluminum, this sprocket helps you crank hard for that next kicker or drive into the next berm. It's for 19mm x 48-spline spindles.
Shimano 105 5750 Double Chainring
$24.99 - $49.99
Shimano 105 5750 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on compact double cranksets.
Shimano Alfine S501 Chainring
$25.00 - $39.99
Alfine S501 chainring for single speed internally-geared drivetrains.
Shimano Alivio M415 7/8-Speed Middle Chainring
$24.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano Deore M533 Chainring
$16.00 - $45.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano SLX M660-10 Outer Chainring
$13.00 - $29.99
Shimano SLX M660 10-Speed chainrings get worn out drivetrains back in like-new condition.
Shimano SLX SM-CRM75 Chainring for FC-M71
$33.99
SLX SM-CRM75 stiff and lightweight chainring delivers smooth pedaling over bumpy terrain. The SM-CRM75 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention. - Special MTB gear teeth profile improves chain engagement and retention - Exchangeable single/double chainring - Crankset can be used as common component - Superior chain retention - Rider tunable
Shimano Sora 3550 Double Chainring
$49.99
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
Shimano Ultegra 6703 Triple Chainring
$18.00 - $133.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano Ultegra 6750 Chainring
$19.99 - $158.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano Ultegra 6800 Inner Chainring
$19.00 - $165.00
Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner
Shimano Ultegra Chainring
$165.00
Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command. - Bolt circle diameter: 4-bolt 110mm asymmetric - 50T pairs with 34T inner ring - 52T pairs with 36T inner ring - 53T pairs with 39T inner ring Inner rings sold separately
Shimano XT M770 Chainring
$14.99 - $90.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano XT M771 Chainring
$21.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
SRAM Mountain Steel Chainring
$8.99 - $26.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
SRAM Road Inner Chainring (Compact)
$22.99 - $26.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
SRAM X-Sync 2 Eagle Direct Mount Chainring
$20.00
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel
Race Face Bash Guard Fat Tab
$34.95 - $39.99
Race Face Fat Tab Chainring Guards • Compatible for cranks with 4-5mm thick chainring tabs • Designed to protect your middle and inner chainring from impacts
Race Face Race Chainring, 9-speed
$16.99 - $59.99
• CNC machined from 7075-T6, one of the strongest alloys available today • Outer rings are made from 4mm thick material & inner ring from 5mm thick material for unsurpassed durability • Rings feature our patented S.H.I.F.T. technology, featuring hard-wearing steel S.H.I.F.T. chips for dual action up-shifts
Origin8 Alloy Blade Chainring - 104 BCD/4-Bolt
$29.99
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
Origin8 Alloy Blade Chainring - 110 BCD/5-Bolt
$24.99 - $39.99
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
Origin8 Alloy Blade Chainring - 130 BCD/5-Bolt
$32.99 - $39.99
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
Origin8 Alloy Blade Chainring - 74 BCD/5-Bolt
$19.99
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
Origin8 Alloy Ramped Chainring 22-Tooth - 58 BCD/5-Bolt
$18.70
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
Page 1 of 12 Next page