Other

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE / REVIVE 2.0

Designed to simplify thousands of hangers into one universal design that can be easily stocked by your local bike shop. Our hanger is uniquely forged and fully machined from aluminium giving you the toughest hanger possible. We always recommend having a spare to be sure of no missed rides. - Compatible with all frames designed to accept the SRAM UDH - Compatible with all MTB and E-MTB drivetrains - Forged and Fully Machined from 7075 Aluminium - Supplied with Mounting Screw and Washer - Thru Axle Pitch M12 x 1.0 Manufacturer’s part number: AC-DRHG-MTB-A7

An effortlessly subtle and minimal design that keeps your seat post secure and adds the last splash of colour to your build. No edge left unsmoothed, and no detail overlooked. Even the split in the back has been machined wide enough so there’s no need to detach your dropper cable, which makes installation a breeze. A stainless-steel bolt gives reliable clamping power and ensures no rust even in the grimmest conditions. - Stainless Steel Hardware - 6061-T6 Aluminium - Weight: 22g

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

Fits all Road or Mountain bikes with BB90 or BB95 shell - Includes two bearings and two seals - Compatible with 24mm spindle cranks - Grade 10 steel balls; ABEC-3 precision - 50g

Stainless steel crown race - Fits 1.5" straight steerer - H6049 (NO.12B-6)

We set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, we’re proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. Machined by us right here in Chico California to the highest tolerances. - 6061 Aluminum - 22.2mm Clamp Diameter - 40g

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multispeed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. Designed with adjustability in mind, the Chain Keeper can accommodate a range of chain line measurements and chainring sizes. - AL6061, black ano - Portion of seat tube where the clamp mounts must have a circular profile - For frames with tapered seat tubes, the Chain Keeper Extension can be used to raise the clamp to a higher section of tubing with a straight circular profile - 69g *** For more detailed information, please see the Chain Keeper Fit Guide at: http://paulcomp.com/chain-keeper-guide

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

• Designed to keep dust and dirt out of V-Brake cable/housing systems

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Type: Lock washer - Size: 1" Keyed

Volume Spacer tuning kits for FOX suspension fork service and repairs.

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Replacement piston and seals for Hope disc brake calipers.