Write a Review

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

The Hydrogen Aero Road Socks use the same VaporRize Hydrogen yarns used in our Hydrogen Vent Socks on the foot but adds a rib-knit cuff that gives you an aerodynamic advantage over normal socks. It's like getting free speed for your legs. - Rib-knit cuff has an aerodynamic stripe pattern, providing a speed advantage without needing a special fabric to be sewn to the sock. This allows for the ultimate comfort in this high-performance category. - VaporRize Hydrogen yarns are extremely lightweight and soft against the skin, placing an emphasis on moisture transfer and minimizing friction. - Powerband mid-foot arch supports the foot and secures the shape and fit where the foot needs it most. - Vented mesh toe channel helps to keep things light and airy within the shoe. - Targeted textured zone under forefoot reduces slip. - 7" cuff height (size Medium)

GRAVEL Cannonball is a go-to gravel race tire for normal conditions. The tread pattern features a directional, tight-knit center tread that sheds dirt and debris to decrease rolling resistance, and side knobs for effective cornering traction. Cannonball is built for all-around gravel riders and racers. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Transitions lugs are spaced out and vary in height to boost traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

- Waterproof (10,000mm) - Highly breathable (10,000gm/24hr) - Micro fleece-lined collar for added comfort and warmth - Quick-dry mesh lining for extra comfort - Utilises our REFLECT360 retro-reflective material - Adjustable waistband and velcro cuff - Waterproof storm zip - Seam-sealed for extra waterproofing - Side pockets - Low profiled rear spray guard - Machine washable - Weight - 440g (size variable) - Fabric 100% Polyester with TPU waterproofing

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and to perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening

- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams prevent chafing - Odour prevention: treated with Polygiene Odor Crunch - Machine washable

Discover the perfect balance of comfort and style with our Graphic Short Sleeve Relaxed T-Shirt. Crafted from a soft and durable 6.5-ounce heavyweight cotton, this shirt ensures a comfortable and lasting wear. The rib-knit crewneck collar and cuffs maintain their shape for a neat look. Featuring a subtle yet distinctive screen-printed graphic on the left chest and back, this shirt adds a touch of individuality to your casual wardrobe. With a relaxed fit that provides ample room in the chest and shoulders, and available in unisex sizing, it's a versatile choice for anyone. - 6.5-ounce heavyweight cotton is soft and durable. - Rib-knit crewneck collar holds its shape. - Screen-printed graphic on the left chest and on the back. - Relaxed fit is roomy in the chest and shoulders. - Unisex sizing. - Fabric Content: 100% Cotton (6.5 oz).

absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are for use with all pre-2014 Shimano 5-bolt cranks, such as Dura-Ace FC7950, Ultegra FC6750, Shimano 105 5750, and more. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Use with absoluteBLACK long chainring bolts - 6.5% ovality is ideal for road climbing

- Available for carbon and aluminum - Easy to replace and service - Wear evenly and maximizes braking power - Pad Material (RB): Rubber - Type (RB Pads): Road/CX - Rim Compatibility (RB): Aluminum - 2 Pack

Step into stiff pedal efficiency with Serfas' Palladium Road Shoes. The triple compound soles maximize your pedal power, and the reinforced heels provide added fit while keeping the shoes' weight down. They're comfortable, too, as the light Syn-Tech uppers breathe nicely so you'll feel great come the town-line sprint. And when it's time to take them off, the simple single-button release buckle is a snap. - 325 grams (size 44)

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

From pro-level race bikes to sport, fitness and adventure bikes, Giant delivers the benefits of tubeless tire technology to riders of all types. Features - Upgrade to tubeless performance - Specially formulated adhesive backing to manage heat generated from rim brakes - Lighter than most standard rim tapes and rim bands; weighs only 5g per wheel - Fits tubeless compatible on and off-road wheels with 19-35mm inner rim widths - One roll can tape up to one 29er wheelset

- 2-sided clipless pedal for gravity riders - Large platform extruded and CNC machined aluminum body - Updated cage with front plates and bevelled edges - 685zz sealed bearings and IGUS bushing - Adjustable cleat engage/release tension on each side

Bike Shoes You Can Wear All Day, Every Day Ride to work. Walk to class. Kick it on the weekend. The Five Ten Sleuth Bike Shoes let you flow comfortably between work, school and the bike or coffee shop. Their pedal-gripping rubber tread means excellent flat pedal control, and their low-profile style makes them your do-it-all shoes. - Regular fit - Lace closure - Leather upper - Biking shoes with street style - Shock-absorbing EVA midsole - Non-marking Stealth Marathon Classic-Dotty outsole - Imported

Bontrager's Race XXX Lite Seatpost is made of OCLV carbon for a sweet ride and minimal weight. Carbon's unique vibration damping properties smooth the road and the trail so you can go longer and harder. And, this post boasts an easy-to-use, one-bolt, infinitely-adjustable clamp.

MicroSHIFT's H10 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Sprockets are chrome-plated for hardness and corrosion resistance - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Steel lock ring Gear combinations: - 11-25T: 11-12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-14-15-17-19-21-24-28 - 11-32T: 11-12-13-15-17-19-21-24-28-32 - 11-34T: 11-12-13-15-17-19-21-24-28-34 - 11-36T: 11-13-15-17-19-21-24-28-32-36

The only jersey you'll ever need Circuit sets the standard for bike jerseys. It mixes sensible cycling-specific features with timeless style and features ultra-breathable fabrics and top-level comfort that's perfect for every kind of ride. Product details - Profila Dry main materials wick moisture and dry quickly to keep you comfortable - Full-length YKK zipper allows ventilation on long climbs and warm days - Wrapper pocket on left hip provides easy access and extra storage for your ride needs - Rear zippered security pocket with audio routing on back makes for easy listening - Three open back pockets provide convenient access to your ride needs - Drop tail design covers your backside in riding positions for a cycling-specific fit - Fitted cut provides a streamlined body fit for enhanced performance

- Full alloy forged floor pump - Laser etched graphics - Full Oil Slick finish - Oversized alloy piston shaft-Smooth and quiet operation - Patented auto-switching head fits presta and schrader valves

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems

- Redesigned TPR handle features improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size marking, and color band for quick wrench identification. - Made from heat-treated S2 tool steel to ensure high strength and lasting performance. Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.

You’ve got places to go. The 7i is the reliable super commuter that will get you there. Explore the city's ups and downs with a 7-speed internal gear hub, fenders, rear rack and lightweight but sturdy alloy frame. - Choose the frame geometry that's right for you: step-over or step-thru, with a lower standover height for easy on and off maneuverability. - The foot-forward, upright riding position provide optimum speed, comfort and control. - Choose from a variety of colors. - Customize your Loft and make it your own. Add a front basket for storage, a bell so they hear you coming and cup holder for your morning coffee. - Top it off with an Electra Commute helmet with MIPS and arrive fashionably safe.

- Racing Ralph's grip with less rolling resistance than Furious Fred

Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

Super light poly-stretch fabric and welded seams create optimal comfort that pair up with our pro liners (sold separately) or a bib short like a champ. DRIFT shorts have perfect pocket placement behind your leg so you won’t even notice your phone and a slim rear waistband pocket to sneak in a snack. SPECIFICATIONS - Ride Fit - Lower Leg & Center Back Waistband Zippered Pockets - Blue Sign Certified 4-Way Stretch Woven - Critical Welding Construction - Quick Dry Finish

Finding the perfect trail jersey is often a struggle but with our new Trail Jerseys, we believe we've hit the mark. The secret sauce comes from the new MiniR fabric that reflects the sun to help keep you cool yet is plenty tough for the rigors and abuse that comes with trail riding. Not stopping there, we employed a casual style so you'll feel right at home on the mountain and then grabbing some grub on the way home. - Crew neck collar keeps things casual and comfortable. - Fabric content: 90% Polyester, 14% Cotton, 6% Spandex.

These Shimano-compatible 8-speed shifters feature comfortable ergonomics, easy installation, and durability you can rely on. Whether you're replacing a broken shifter, doing a drop bar conversion, or building from scratch, these well-constructed shifters will do the trick. - Includes cable and housing - Separate, dedicated lever for upshifts and downshifts - Replaceable hood cover and face plate - External shift cable routing for low friction, smooth response and easy cable and housing replacement - Compatible with Shimano 8-speed road systems

Dropper post levers are something a lot of us overlook—we want our dropper to work but don't think about the button that makes the magic happen. After testing a bunch of levers, from the plastic ones to the ergonomically weird, even the best in class, we decided we could do better. So we made the Loam Lever. It's the most adjustable lever around, ensuring you can modify it to fit your exact ergonomic specifications. The lever's grippy, injection-molded pad has got your back in sloppy weather conditions. And, speaking of weather, we made sure the whole thing was as weatherproof as possible, meaning your lever won't squeak, bind up, or fail after being in the rain. The Loam Lever Has 5 Key Characteristics: 1. Adjustability - We believe precision matters, this lever provides two forms of adjustment so you can dial-in your perfect placement.  2. Weather Proof - Oversized high-quality sealed bearing paired with an additional seal and all stainless hardware for longevity and durability. 3. No-Slip Grip - Speaking of weather, the Loam Lever features a grippy, injection-molded thumb pad so you can drop or raise at the right time in even the sloppiest of conditions. 4. Techy AF - Custom CNC machining throughout the whole design of the Loam Lever for precision and weight reduction. 5. Direct Mount - Available in SRAM's MatchMaker X for Guide brakes and Shimano's I-Spec II for XTR M9000, XT M8000, SLX M7000, and DEORE M6046

SRAM's X-Sync 11-speed chainring features tall teeth with an alternating tooth profile to hold the chain amazingly well and still provide space for mud to clear. - Drivetrain Speeds: 10, 11 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring

- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps

These versatile All-Mountain biking shoes feature a cushioned BMX and skate style for maximum comfort. The high-grip Stealth rubber outsole with Classic Dotty tread provides excellent traction on flat pedals. - Breathable leather and mesh upper with supportive midsole - High friction, shock absorbing, Dotty tread outsole - Features Stealth S1 rubber - Split grain, leather/textile upper - Durable, one-piece molded cupsole for more support - Medium-flex midsole - Weight per shoe: 399g (based on Women's Size 11)

Full weather protection for rainy trail days. Throw them into your pack and you'll never be caught out again. - Adjustable grippy waistband with flat cord - Adjustable lower leg width - GORE-TEX PACLITE Plus Product: extremely breathable, ultralight and packable while durably waterproof, windproof and robust - Zippered waterproof side pocket - Zippers at bottom of leg for easy on-and-off - Pre-shaped knees - Reflective details

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike

The lightest, longest, smoothest, and most reliable dropper post that will fit your bike. The V3 is the lightest infinitely-adjustable dropper post on the market, it has the shortest total length and stack height of any dropper post, 20mm of adjustable travel, an extended 350-hour service interval, and new ultra-low friction IGUS® bushings and SKF® seals. Plus, save an additional 10g with our Titanium Bolt Upgrade Kit.

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

A new design and improved cleanability maintains the Podium bottle's position as the best-of-the-best within the cycling industry. This premium bike bottle prioritizes performance and excellent cage fit above all else for both professional and recreational users. Easy to squeeze and always BPA free, the Podium is the ultimate bottle for rapid and reliable hydration. - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

The Townie Go! 7D is the e-bike for everyone. It combines comfort and control with the power and fun of an e-bike. Now featuring a fully integrated battery with 3 levels of support, 27.5" tires and Electra's patented Flat Foot Technology. Go faster, farther, and funner for less than you thought possible. - The Townie Go! 7D features our patented Flat Foot Technology for ultimate comfort and control while riding. - Reach a top-assisted speed of 20 mph with support from the rear hub motor. - Monitor your level of power support and battery charge easily with the improved LED controller. - Turn your e-bike into a me-bike with a basket, bell or helmet. The e-ssentials, of course. - This Go! e-bike combines quality, comfort and value with Electra's signature style.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

When the weather gets cooler, the Captain Jersey will keep you warm from the start of the ride, and wick away moisture when the pace picks up. Details The Captain Jersey is a cool-weather cycling jersey. The AirDry Brush fabric assists with moisture management and does an excellent job at wicking humidity from the body. 2 additional patent-pending Safety Pockets towards the front are positioned to be easily accessible for safety and convenience. Plus, they have reflective accents for additional security on the road. A silicone gripper has been integrated into the bottom hem to keep the Captain Jersey in place when you get moving. Comfort/Construction: - Silicone grip at hem Climate: - Dry blend moisture wicking Safety: - 3 back pockets with reflective accents - 2 easy-to-access side pockets with reflective accents - Reflective logos at front and back

You have places to go, people to see, and fitness goals to achieve. We get it—life moves pretty fast, so it's a good thing we made Sirrus to help you with all of it. Wherever you're heading, Sirrus will take you there. This Sirrus features a reliable set of components that are built to withstand years of daily abuse, like comfortable Body Geometry touchpoints and fuss-free mechanical V-brakes. So, as you push yourself to reach your goals, you'll feel more connected to your bike and know that you have the perfect partner with Sirrus. - Lightweight A1 Alloy frame with clean internal cable routing delivers a bike that is 1.1lb (.5kg) lighter than previous version. - Upright position with Body Geometry touchpoints for comfort and control. - Reflective graphics on frame and tires for maximum visibility.

The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length! PRODUCT FEATURES: - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip SOFT compound for added comfort! - Increasingly popular with top athletes around the world - Open ends with Push In Plugs end plugs included - Sold In Pairs - 160mm

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

Love the size of Chunky but desire extraordinary? Ribbed has 8 distinct ribs that optimize shock absorption and grip! - 60 Grams - Standard Grip Length – 5 1/8? - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included *Install Bar Plugs first for the protection of grips and ease of installation *Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.

The shoe that offers the best for everyone. Whether racing or a casual ride, the Sidi Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, Sidi cycling shoes include a user replaceable polyurethane heel pad

- Replacement visor for all Chamonix helmets for model year 2014 to present. - One Size

-Aircap OD2 expander system steerer plug (2012-2016)

Shorten your steerer, trim your handlebars and always make sure to measure twice with Park's Hack Saw. It features an outstandingly rigid aluminum die-cast frame with a blade tension adjuster and a superbly comfortable handle. The SAW-1 comes with one blade and accepts all 12-inch (300mm) replacement blades.

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil

- Compass fit - 11 vents with increased air flow - Compatible with click-mount light - Lightweight - Integrated brim - Lay flat strap dividers - Compression molded pads - Light & durable dual shell - Snowsport knit compatible - Average weight: 390g(mips) - MIPS: multi-directional impact protection system

- 20% lighter rear shifts - Consistently stable shifting - RD new shadow design with optimized slant design - New shift cable with new hyper low-friction coating technology - Longer lever body - Anti-slip on main lever - Thumb Operation - I-spec II - Model Number : SL-M8000-I - Series : DEORE XT - Shift Lever Type : RAPIDFIRE Plus - Rear speeds : 11-speed - Front Shifting : Front Shifter Available - Instant Release : Yes - Multi Release : Yes - 2-way Release : Yes - Optical Gear Display : NO - Shift Cable Casing : OT-SP41 - Shift Cable : New low friction shift cable

Introducing the new Vista Short from Terry, a very inviting new trail short, full of fresh ideas. Fit doesn't get any better than this, with pull-on styling and a wide stretch waistband that easily accommodates a wide variety of body types. It also comes with Terry's new Cyclo Brief 2.0, a minimalist liner outfitted with a reticulated foam chamois. Terry has added streamlined pockets and a cool link print on waist so there's even more to love. Product Details: - outer short: 86% recycled nylon/14% spandex in a unique stretch twill weave (100% of the nylon fibers used are recycled) brief: perforated 76% nylon/24% spandex - wide (front), 4-way stretch nylon/spandex waistband with faux-fly stitching at front allows for more accommodating fit - wrap-around printed (chainlink) paneling - 2 front drop-in hand pockets - 1 zippered pocket on right leg, large enough for a smartphone - 10-inch inseam - printed hem lining–flip up to shorten the inseam by 1.25 inches - sold with Cyclobrief 2.0 with soft elastic comfort waistband, laser-cut leg openings and Reticulated chamois Chamois Reticulated Chamois: Uses reticulated foam technology, creating a pad that's significantly thinner and lighter, more breathable and ideal for indoor conditions. Narrower, seamless, 4-way stretch Elastic Interface Technology chamois with Terry's innovative soft wing construction; antimicrobial cover. Made in Italy.

- Double-butted 6061-T6 aluminum construction - RHM Shallow-ergonomic profile with more hand positions than traditional anatomic shapes - Black anodized - Drop/reach are measured center-to-center, width is measured outside-to-outside - 280g (42cm)

The Team grip was designed by our team riders who wanted a wider, more comfortable grip for big bars and brakeless riders. Vortex PC Bar Plugz are included. - Designed by Stolen Team riders - Includes color-matched Vortex PC Bar Plugz - Length: 165mm - Diameter: 31mm - Weight: 4.3-ounces per pair

The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

Built on the same concept as our Gravelking and Gravelking SK models, the EXT version incorporates the same technology on top of a specially designed tread tailored to work best in muddy and sloppy conditions. Better puncture resistance while retaining the superb balance of a light riding feel and grip. - Ideal for gravel and dirt, Mud/Loose condition model, better puncture resistance while retaining the superb balance of a light riding feel and grip - Available in Black Tread and Black or Brown Wall Colors - Folding (Aramid) Bead with ProTite Shield Plus Protection - Available in 700 C and a variety of widths - TLC in widths 33mm and larger