Other

Paul's dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. - Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life - Pinch bolt and cable head recess allowing you to run the cable in either direction - Hinged clamp so you can install it without removing the grip - Barrel adjuster for fine tuning the cable tension

Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys

Thumbies are the original upright handlebar mount and easily transform bar end (aka barcon) shifters into thumb shifters. - 6061 Aluminum - Fits 22.2mm handlebars - Hinged clamp for easy installation - Compatible with Shimano bar end shifters (not included) - Updated! now have raised platforms to clear hydraulic disc brake levers - 60g

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multi speed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. - Accommodates a range of chain line measurements and chainring sizes - Not designed for downhill/freeride/big hit use

This little goodie allows you to mount any SRAM underbar trigger shifter to a 31.8 dropbar. Why do you need this? Doesn’t SRAM make their own road shifter? Well, yes they do. But none of them are compatible with the awesome 10-42t spread found on their mountain 1x drivetrains. - 6061 Aluminum - Fits 31.8mm handlebars - Compatible with SRAM MTB RH shifters (not included).

A rear brake cable hanger which provides a cable stop for rear centerpull and cantilever brakes - Pivots to align the cable with the brake, regardless of frame geometry - Includes barrel adjuster - Attaches to the seatpost itself, and the clamping surface has no lip - Fits 27.2mm seatpost

The Funky Monkey is a simple, hanging housing stop for front and rear center pull and cantilever brakes. This simple part is brought to a whole new level with our renowned machining prowess. - Cable stop for front centerpull and cantilever brakes - Integrated barrel adjuster for cable tension. 26G - Made in USA Clamp Diameter: 1-1/8-inch

The ultimate fancy straddle wire holder - Integrated cable clamp & 8mm hex so you can put a wrench on it - Moon Units come as a set of 2

A pair of anodized Spring nuts for use with any Paul Component rim brakes. - Replacement spring adjusters to fit any Paul rim brake - Machined in the USA of 6061 Aluminum - Sold per brake

Replacement parts for Paul rim brakes.

Replacement parts for Paul rim brakes.

We set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, we’re proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. Machined by us right here in Chico California to the highest tolerances. - 6061 Aluminum - 22.2mm Clamp Diameter - 40g

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multispeed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. Designed with adjustability in mind, the Chain Keeper can accommodate a range of chain line measurements and chainring sizes. - AL6061, black ano - Portion of seat tube where the clamp mounts must have a circular profile - For frames with tapered seat tubes, the Chain Keeper Extension can be used to raise the clamp to a higher section of tubing with a straight circular profile - 69g *** For more detailed information, please see the Chain Keeper Fit Guide at: http://paulcomp.com/chain-keeper-guide